【Abstract】 This paper introduces the current market demand for desulfurization pumps at home and abroad, and focuses on the technical application of TL(R) flue gas desulfurization pumps. >> Enter the International Pump Technology Summit Forum

[Keywords] flue gas desulfurization pump structure CFD CAE

I. Introduction

Over the past 100 years, a large number of coal-fired power plants have been built to meet the demand for electricity. It is estimated that the world's sulfur emissions from thermal power plant chimneys will reach 60 million tons per year, and this number is still growing at a rate of 3% per year. These sulfur-containing waste gases pose a great environmental hazard. At present, the international community is widely aware of this hazard. And actively take measures to reduce the harm. To this end, FGD has become a core technology in environmental protection technology, and a large number of FGD devices will be built in the next 10 years. 86% of the completed FGD devices are wet desulfurization devices. There are many pump products required in these devices, which are collectively referred to as desulfurization pumps. The process parameters of desulfurization pumps in typical wet desulfurization devices are as follows.

Desulfurization pump process parameters

Working condition parameter Pre-wash cycle pump Spray circulation pump Mixed feed pump Slurry discharge pump
Head / m 20~30 20~35 30~40 20~35
Flow rate Q/(L/s) 150~500 400~4 000 10~40 50~400
Weight concentration C w (%) 2~5 8~18 15~40 10~15
pH value 0~2 4.5~6.5 6.5~14 4.5~6.5
Chloride (ppm) 10 000~40 000 ~60 000 1 000~10 000 300~500
Fluoride (ppm) 1 000~4 000
Wear strength in in Strong in
Corrosion strength Strong Strong in in



Second, the technical development status of international desulfurization pumps

The technology of international desulfurization pump products developed rapidly in the late 1990s. Some pump product manufacturers represented by WARMAN have invested a lot of money and strength in such products, which is mainly due to the rapid desulfurization market of environmental protection industry. Driven by development. WARMAN first launched the GSM series of products ... (The following details are omitted)


Third, Shijiazhuang powerful pump industry group desulfurization pump situation

1. Pump parameters (design point)

2. Pump structure

3. Material advantages

4. Sealing technology

5. Bearing assembly

6. Advanced design tools


Fourth, the conclusion

........................



For details, see the Proceedings of the International Pump Technology Summit.


Elevator Traction System

The function of the elevator traction system is to output and transmit power to drive the elevator. It is mainly composed of traction machine, traction wire rope, guide pulley and reverse sheave. The towing machine provides power for the operation of the elevator, which is composed of motor, towing wheel, coupling, reducer and electromagnetic brake. Both ends of the pulling wire are connected to the lift car and counterweight respectively, and the lift car is driven up and down by the friction between the wire rope and the pulling wheel. The guide wheel is used to separate the space between the lift car and the counterweight. The use of compound winding type can also increase the drag force. Professional Elevator Traction System manufacturer is located in China, including Traction Elevator System,Traction Lift System,Traction Elevator, etc.

Elevator Traction System,Traction Elevator System,Traction Lift System,Traction Elevator

Suzhou Stable Trade Co., Ltd , https://www.stable-elevator.com

Posted on