The types of paint are roughly divided into phenolic paint, alkyd paint, polyurethane paint, nitro paint, polyester paint, and PU paint. Among them, phenolic paints and alkyd paints are basically eliminated during the decoration due to poor texture and adhesion of paint films, and a large number of urethane paints, polyester paints, and PU paints used on high-grade furniture are used in large quantities. Due to the cost (nitrogen lacquer 8-15 yuan / kg, polyester paint 18-28 yuan / kg, PU lacquer 43--65 yuan / kg), processing methods and equipment, the current market on the use of 90 sets of wood doors Fat paint, a few manufacturers use PU paint. In general, polyester paint and PU paint have to look for color, three steps and two sides and other six processes, some brands increase the curing and waxing process. Therefore, in the selection of wooden doors, paint is one of the factors that must be considered. It directly affects the texture, feel, moisture, environmental protection, durability, resistance to yellowing and other issues. Wood paint process standards: (A) Wood Oil Cleaning Project Alkyd varnish (1) Clean the surface of the woodware → Polish the sandpaper → Putty → Polish → Paint → Repeat the above procedure (2) Construction process A: Primary treatment before clean oil brushing: In the important process of brushing varnish when grinding the base layer, dust, oil, and other impurities on the wood surface should be removed first, and the nail cap should be trapped within 1 mm as required. When sanding the sandpaper, rub the rubbish paper into the short wood side pad, grind it at a large angle, and polish and polish it with a damp cloth or cotton wire. B: Use a knife or a scraper to scrape the oil into the nail holes, seams, etc., wipe it horizontally, scrape light, and collect the net. After drying, gently grind lightly with sandpaper along the wood grain. Tide cloth or cotton wiping. C: The construction specification of the clean oil brushing: When brushing oil, it is constructed in accordance with the operation method of top-bottom, bottom-to-front, front-to-back, front-to-back, front-to-back, front-to-back and back-to-back, and horizontal brushing. D: When the varnish is applied on the first pass, a certain amount of thinner dilute paint should be added to facilitate quick drying of the paint film. Three trees paint paint paint wooden door home decoration furniture Waterproof Material,Geotextile,Geocell Co., Ltd. , http://www.nsgeotextiles.com
Ou Long Paint ( Western Chemicals )
1 234 Next> Total 4 Pages
Page to page