Plate feeder is a necessary equipment for cement production line. It is most widely used in cement industry and mining industry. Plate feeder customers must first determine according to site conditions how large the inclination angle of the optional plate feeder needs to be, and how much is the conveying distance. (The distance between the center of the head wheel and the tail wheel), the capacity of the supporting crushing equipment, and the size of the feed material,
Based on these conditions, the equipment manufacturer will determine which form of plate feeder will be used for the customer, mainly to help the customer choose a light, medium or heavy plate feeder, determine the motor power and reducer model.
However, for a real customer, the concern is not that.
Customer inspection of plate feeder manufacturer notes:
1: The focus of investigation should not be on the problems of the cart floor tilt, auxiliary equipment production capacity, and feed granularity. The manufacturer is concerned about the selection of users. The customer should be concerned about the quality of the product and some possible problems that may occur during use, such as welding. Whether the technology passes through, whether the surface of the machine has burrs or not, and if there is no gasket installed in the screw after the installation, whether there is a test equipment before delivery or whether the product is qualified or not. This is not to be confused by the selection problem of the manufacturers during the consultation process. Do not reverse the research focus.
The quality of the plate feeder is the highlight. In the bid for the purchase of the plate feeder, the production scale of the factory and the machine type of the production equipment are clearly required. For the plate feeder produced by the small factory, the welding technology is simply not involved in the operation process. There are serious quality problems. For a NB1818 single-stage hammer crusher, if a plate feeder is to be used, it is necessary to consider the inclination angle, length, and width of the plate feeder. The manufacturer will select the model for the user. The purchase company must pay attention to the problem. Product quality and cost performance, plate feeder operation and quality have a great relationship.
2: The production details can not be ignored On the one hand, if the welding technology is not closed, there may be problems such as cracking and material splashing. In severe cases, it will endanger the safety of the operation. On the other hand, if the gasket is installed after the gasket is installed, the gasket wears quickly, and if it is not replaced after the wear, it will cause loosening of the equipment, and replacement will cause downtime and other troubles.
The quality inspection process should not be overlooked. In addition, the quality inspection of the ex-factory equipment is also of paramount importance. The quality is not guaranteed and everything will become unknown. This is directly related to the size of the company. The cement plant will purchase the equipment such as the plate feeder. , will go to query the development process and the main business of the manufacturer.
At the same time, cement manufacturers attach great importance to the selection of feeding equipment. The size of the feeding capacity determines the production capacity of the entire production line, and it also has a close connection with whether the equipment of the production line can give full play to the equipment's production capacity advantages. Therefore, the purchase of plate feeders is necessary. Consider the above aspects comprehensively.
company phone

Yitong Plastic is a leading manufacture specilizes in Thermoforming Plastic Sheets,The diversified product inculding HIPS sheet,PP sheet,ABS sheet and PS+PE sheet.The sheets can be with Permanent Antistatic, Common Antistatic, Conductive & Semi-conductive,Insulating.It is widely be used in Electrical,Automotive ,Hard Disk Drive,Food,Cosmetics,Medical Packaging Industries.

 

 

 Description:

 

1.Base material:PS,PP,ABS,PC

2.Width: 200mm~750mm  (Tolerance:  ± 1mm) ;

3. Thickness: 0.2mm~2.5mm   (Tolerance:  ± 0.02mm) ;

4. Length is customized.

5. Color: black,white,colorable,

6.  Co-extrustion

7. One side is glossy another side is matte

8. Certificates: ISO9001,REACH,CTI RoHS. 

 

 

Features

 

1.Stable surface resistance

2.Good thermoforming characteristic Rigid,

3.Stable performance, not influenced by humidity.   

4.Excellent conduction properties,Superior processing property.

5.High impact resistance,Excellent light transmittance.  

6.Eco-friendly: odorless, tasteless, nontoxic, non pollution, easy to be recycled.  

7.No burrs, no powdering or particle shedding  observed on the tray

 

 

 

Thermoforming Plastic Sheets

Conductive Plastic Sheet,Blister Plastic Sheet,Extrusion Plastic Sheet,Thermoforming Plastic Film

Pujiang Yitong Plastic Electronic Co., Ltd. , http://www.yitongplastic.com

Posted on