Tile is our home decoration, an essential building materials for the ground, but in the life outside, it will inevitably bump, if the tile is damaged how to do it? How are tiles repaired ? Today, we will learn together about how to repair damaged tiles .

First, the common causes of tile damage

1. Wall deformation

The cracking of the tiles caused by the deformation of the wall presents a regular, horizontal, or oblique regular crack.

2, the paste failed

Unsatisfactory adhesives can also cause problems such as emptying and dropping after the tiles are laid.

3, tile is not submerged

If a tile with a certain water absorption rate is not immersed in water before being laid, the tile will absorb moisture during the process of setting and increasing the strength of the cement mortar after laying. This will cause the cement to lose water and become unbonded and its strength will decrease. Cement or cement reduces the adhesion of the original wall surface, resulting in hollowing and shedding.

4, no gaps between tiles

If no proper gap is reserved during paving, the tiles may be squeezed, cracked, emptied or shed.

5, poor quality tiles

Some inferior tiles have insufficient hardness. If the load is too high during use, cracking will occur (mainly the floor tiles).

Second, tile damage repair method

How to Repair Damaged Tiles, Method 1

Fine sandpaper can be used to polish the brick surface carefully, and some effects can be obtained. Be sure to touch it with water. This method can get a very good effect on the small scratches on the brick surface.

How to Repair Damaged Tiles, Method 2

Sometimes only one or two pieces of broken old tiles are damaged, and the original cement mortar is difficult to cut or cut. At this time, only a thin layer of epoxy resin (universal adhesive) was applied on the back of the tile and on the cement wall, and then pressed firmly to ensure that the new tile was flush with the surrounding tile.

How to Repair Damaged Tiles, Method 3

The old tiles are still in good condition, but they are only separated from the junctions of other finishes. The shingles at the joints should be removed when repairing, and the epoxy resin adhesive should be injected. After drying, the waterproof flexible caulking material is used at the joints ( Such as glass glue) inching.

How to Repair Damaged Tiles, Method 4

Clear the caulking white cement along the edges of the tiles, and use a small chisel to carefully remove the damaged tiles. If the tiles are firmly glued around, and you do not want to replace the surrounding tiles, you can use a glass-cutting knife to portray the middle of the tiles. Some of the tiles were first cut, and then the sharper steel chisels were used to slowly repair the broken porcelain pieces around the edges.

Tiles are damaged how to repair, method 5

After the tile has been cut off, use the steel chisel to cut away the underlying cement mortar. Do not use too much force, otherwise it will shatter other intact tiles. Apply water to wet surfaces after removing dust.

Regarding how to fix the tiles , I will introduce them here. I hope to help you, and more information on the decoration will be provided on this site. Please stay tuned.

What are the decoration of the brand-name tiles How to choose the tiles How to choose the tiles Tiles How to make the tiles Thin-paste method

Illumination LED

LED lamps have many advantages such as energy conservation and environmental protection. With the reduction of LED lamp quotation, LED lamps have slowly entered the broad home lighting and lighting market in recent years, and the use of infrared LED Lamp Beads has also become more and more extensive with the implementation and application of this LED lamp. So, what are the main applications of these infrared LED lamp beads? We will give you a detailed introduction.


1. In addition to being primarily used in scene lighting malls, including building decoration, interior decoration, scenic spot decoration and other lamps, infrared LED lamp beads can also be used in decoration lighting lamps for major buildings, streets, business centers, scenic spots, bridges, communities, yards, lawns, homes, leisure and entertainment occasions, as well as commercial lighting lamps integrating decoration and advertising.


2. Infrared LED lamp beads are mainly used in car lamps. The car shopping mall is a lamp shopping mall with fast development in the use of infrared LED lamp beads. It is mainly used for indicator lights such as instrument panel, air conditioner, audio, and internal reading lights inside the car, and the third brake light, tail light, turn signal, and side light outside the car.

Illumination Led,In Line Led White,In Line Led 5Mm,In Line Led Transparent

Dongguan XINYUDA Technology Co., Ltd. , https://www.gdxige.com

Posted on