"Dynamic Netcom Power Generation Device" came out in Beijing and won the national patent A dynamic Netcom power generation device known as “dynamic wind power†is now available in Beijing Huairou, and has obtained a utility model patent certificate issued by the State Intellectual Property Office. People in the industry believe that this technology has filled the gaps at home and abroad and added a new energy source for humanity. After popularization, it will make a huge contribution to the improvement of the human living environment and it will have incalculable social and economic benefits. This national patent was successfully invented by Meng Qingguang, a Beijing migrant worker from Zhuanghe City, Liaoning Province. On the eve of the Spring Festival, the inventor Meng Qingguang briefed the reporter on the situation in the office of No. 77 Hospital of Wushu School, Sanhua District, Huairou District, Beijing. Dynamic wind energy refers to the energy generated by the static air impacted by a moving object. The development of dynamic wind energy refers to the development of resistance energy generated by the impact of static and dynamic air on the traffic devices used for human activities. This patent regards the windage of a traffic device as a kind of energy, and calls it “dynamic wind energyâ€. If we say that in modern traffic, speeds exceeding the "typhoon" and "strong typhoon" are very common, people do not necessarily understand it, but people are very clear about the dangers of "typhoon", "strong typhoon" and "tornado". In fact, the wind of this energy is prevalent in the modern traffic operation. This can be found in the internationally-accepted “Fukufu Wind Rating Tableâ€. Develop and use “Hurricaneâ€, “Tornado†and more massive winds generated by daily traffic, change “resistance†to “power†or “thrustâ€, and let “topwind†become “windward†or “windward†"A pioneering move in the history of human inventions is a revolution in the traffic industry. It is a leap from a single traffic device," drag reduction design," to "reduction drag reduction." Practice has proved that using modern wind energy development technology to develop the above-mentioned energy is completely feasible, that is to replace the windage area of ​​the traffic device with the area of ​​the wind wheel blade, so as to realize the development of the traffic device while reducing the drag. The obstructed area of ​​the power generating device blade of the utility model is less than or equal to the obstructed area of ​​the original traffic device, and no secondary wind resistance is generated to the traffic device. Wind turbine blades work in this particular dynamic environment, with equal energy secondary performance characteristics. The blade must have a moving body to support its movement, so that it can complete the work process. The support must be a traffic device with a considerable wind resistance area. The secondary work of the blade just meets the traffic device that supports this work. Drag reduction needs. In the past, when the slant blade performed work in the fluid motion, the negative force generated by the fluid after work was ignored by people, and the wind exhausted by the wind power was wasted. In the dynamic Netcom power generation device of the utility model, after the wind hits the blade and performs one work, the second work is performed with the same amount of primary function, that is, the “negative work†generated after work is also used as useful work. After hitting the blades, the wind changed direction, but the direction changed, and its energy remained almost unchanged. The traffic is traveling at a high speed, and the blades are turned back to the wind, because the blades have a certain width, so that the refraction of the wind has a considerable thickness, which also helps the reduction of air friction on the side of the traffic device. . This can be calculated based on the “composition and decomposition formula of forceâ€. A large number of experiments have shown that: “In the area of ​​fluid mechanics, the work done by blades in motion under aerodynamic forces has no negative work.†The working principle of this “Dynamic Netcom Power Generation Device†is the same as the principle of current wind energy development. It is only the location of the installation and the occasion of work. The development technology of wind energy is extended from “fixed point†to “dynamic pointâ€. It is suitable for traffic devices that consume energy to overcome resistance. Whether it is fuel, gas, electric, or hybrid, it can be applied as long as it can generate wind resistance. It is the most ideal energy source for future hybrid and electric power traffic devices. . From production to sale, the energy generated by each traffic device will be directly used on the device, without transportation costs; there is no storage fee, management fee, raw material fee, transportation fee, etc. required for other energy sources; the cost is low; , and not subject to seasonal restrictions. Widely used in automobiles, locomotives, ships, airplanes and all other mechanically powered traffic devices, can make traffic devices more than 10-20% energy-efficient. According to the inventor Meng Qingguang, the application of this technology is not the transformation of existing traffic, but the development and application in the manufacturing process. It can be directly used in the engine's power system, but also through other forms of energy conversion such as power generation. Use it. If we calculate the 200 million vehicles (including locomotives and airplanes that are converted into 100-kilometer fuel-efficient 10-litre vehicles) at a speed of more than 100 kilometers per day, we will drive at 1.5 liters per hour per hour for 365 days per day for 8 hours. The proportion of fuel is 0.85, then 74.460 million tons of fuel can be saved each year; if the fuel is calculated at 6,000 yuan per ton of fuel, it can save 447.60 billion yuan annually. This is equivalent to several "Three Gorges", several "Daqing"? "The Three Gorges" operating costs are? "Daqing" operating costs and how much? And "dynamic wind energy," the cost is almost zero, which is equal to the day Energy comes from. Each year will also reduce the emission of hundreds of millions of tons of pollutants. "At present, this technology has matured, and we hope relevant authoritative departments and experts can organize the development project as soon as possible, and at the same time, it will seek development funds and partners for the entire nation, so that this meritorious service can be used for the benefit of mankind as soon as possible." Meng Qingguang said that. (Chen Zhen Yang Guangming)
Recoil Springs,Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring
Professional Recoil Springs manufacturer is located in China, including Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring, etc.
We are factory, we had made these products 15 years, we can give you good serve and quality. Hope to business with you!
Recoil Springs,Steel Spring For Slap Band,Plastic Torsion Springs,Flat Wire Recoil Spring Shenzhen Lanejoy Technology Co.,LTD , https://www.bbq-grillgrate.com